Fill out the feedback form and our managers will contact you
Lighting of vast areas, squares, airports, ports, railway stations (marshalling yards), car parking areas, industrial territories.
Poles are manufactured of steel sheets by bending with one, two or three longitudinal welds, they are protected from corrosion by hot galvanizing (ISO 1461).
This type of coating is not decorative, but only functional.
Corrosion resistance warranty is 25 years.
Following customer’s request paint-and-varnish coating is available.
For a complete range of products and complete technical data, please contact the commercial departments of the AMIRA group of companies.
Technical Information
This table is for reference only. When placing an order, check with the commercial divisions of the AMIRA Group the possibility of manufacturing equipment, taking into account the wind region and climatic performance
Nomenclature
Height*
Weight
Bottom diameter
Support flange size
Center-to-center distance of holes
VMO-16
16 m
650-760 kg
450 – 600 mm
640 – 820 mm
540 – 700 mm
VMO-20
20 m
715 – 1.840 kg
500 – 950 mm
700 – 1.250 mm
600 – 1.080 mm
VMO-25
25 m
1129 – 2.300 kg
480 – 950 mm
750 – 1.200 mm
650 – 1.080 mm
VMO-30
30 m
1.383 – 3.785 kg
600 – 1.150 mm
800 – 1.400 mm
700 – 1.290 mm
VMO-35
35 m
1.927 – 4.460 kg
600 – 1.130 mm
820 – 1.580 mm
720 – 1.450 mm
VMO-40
40 m
2.556 – 5.354 kg
750 – 1.150 m
950 – 1.430 mm
850 – 1.290 mm
VMO-45
45 m
3.841 – 4.768 kg
780 – 920 mm
1.040 – 1.180 mm
930 – 1.060 mm
VMO-50
50 m
7.800 kg
965 mm
1.280 mm
1.180 mm
* There are basic heights of masts. Depending on the customer’s specifications, the height and other parameters may vary
** The plant reserves the right to make design changes that do not affect the quality and technical characteristics of the product
! The weight of the product shown in the table is calculated. Deviation of the actual weight from the calculated one is allowed