Lightning diverters based on high lighting masts with moving frame (VGM)

OrderGeneral information
Fill out the feedback form and our managers will contact you

    • * - required field

    To provide uniform lighting of areas in all directions, protection of buildings and structures from lightning strikes and from voltage surge in the power supply network.  Lightning rod which is immediately exposed to lightning strikes is a steel rod protected from corrosion.  

    Protection from corrosion by hot galvanizing (ISO 1461). This type of coating is not decorative, but only functional.  Corrosion resistance warranty is at least 25 years. 
    Lightning diverters VGM and VGN represent steel multifaceted masts with lighting equipment and lightning arresters installed on top of them.

    VGM and VGN poles have both standard versions designed for standard operating conditions and individual versions which take into account special climatic conditions and order requirements.

    Under a special order it is possible to manufacture any standard sizes to be used in wind region I-VII.
    For each project support design is individually calculated.
    Complete nomenclature of serial products and complete technical data are provided in the Technical Catalog.

    Specifications

    ModelTotal Height, (VMO+rod), H, mBased on mastBottom diameter, D, mmFlange diameter, A, mmHole center-to-center, B, mmRod's Height, H, m
    VGM-1619 - 27mVMO-16m450mm640mm540mm3-11m*
    VGM-2023 - 31mVMO-20m441mm640mm540mm3-11m*
    VGM-2528 - 36mVMO-25m480 - 571mm750 - 830mm680 - 730mm3-11m*
    VGM-30**33 - 41mVMO-30m550 - 600mm800mm700mm3-11m*

    * Lightning rod may be higher than the indicated values, depending on the customer’s technical specifications

    ** the height of the VGM can be any, including higher than the indicated values, depending on the customer’s technical specifications


    * There are basic heights of masts. Depending on the customer’s specifications, the height and other parameters may vary

    ! The plant reserves the right to make design changes that do not affect the quality and technical characteristics of the product

    !!! The weight of the product shown in the table is calculated. Deviation of the actual weight from the calculated one is allowed