Fill out the feedback form and our managers will contact you
To provide uniform lighting of areas in all directions, protection of buildings and structures from lightning strikes and from voltage surge in the power supply network. Lightning rod which is immediately exposed to lightning strikes is a steel rod protected from corrosion.
Protection from corrosion by hot galvanizing (ISO 1461). This type of coating is not decorative, but only functional. Corrosion resistance warranty is at least 25 years. Lightning diverters VGN represent steel multifaceted masts with lighting equipment and lightning arresters installed on top of them.
VGN poles have both standard versions designed for standard operating conditions and individual versions which take into account special climatic conditions and order requirements.
Under a special order it is possible to manufacture any standard sizes to be used in wind region I-VII. For each project support design is individually calculated. Complete nomenclature of serial products and complete technical data are provided in the Technical Catalog.
Specifications
Model
Height*, mast+rod, H, m
Top diameter, A, mm
Bottom diameter, D, mm
Flange diameter, A, mm
Number of spotlights
Rod's Height*, h1, m
VGN-16
19 - 27m
150mm
520mm
730mm
6
3-11m*
VGN-20
23 - 31m
270mm
550mm
800mm
10
3-11m*
VGN-25
28 - 36m
300mm
600mm
800mm
10
3-11m*
VGN-30
33 - 41m
270mm
770mm
1000mm
10
3-11m*
VGN-35
38 - 46m
270mm
820mm
1100mm
10
3-11m*
VGN-40
43 - 51m
270mm
820mm
1100mm
10
3-11m*
VGN-45
48 - 56m
350mm
1000mm
1250mm
10
3-11m*
VGN-50
53 - 61m
250mm
1150mm
1450mm
10
3-11m*
* Lightning rod may be higher than the indicated values, depending on the customer’s technical specifications
** the height of the VGN can be any, including higher than the indicated values, depending on the customer’s technical specifications
* There are basic heights of masts. Depending on the customer’s specifications, the height and other parameters may vary
! The plant reserves the right to make design changes that do not affect the quality and technical characteristics of the product
!!! The weight of the product shown in the table is calculated. Deviation of the actual weight from the calculated one is allowed