Fill out the feedback form and our managers will contact you
Reinforced poles OGS are intended for installation of lighting fixtures, flood lights, above-ground suspension of outdoor lighting cables: arrangement of low-voltage power transmission lines VL-0.4 kV, advertising and information billboards.
Poles are manufactured of steel sheets by bending with one longitudinal weld, they are protected from corrosion by hot galvanizing (ISO 1461). This type of coating is not decorative, but only functional.
Corrosion resistance warranty is at least 25 years.
All the fasteners are galvanized. Coating: hot galvanizing.
Under a special order it is possible to manufacture any standard sizes to be used in wind region I-VII. For each project support design is individually calculated. Complete nomenclature of serial products and complete technical data are provided in the Technical Catalog.
Specifications
Model
Height, H, m
Weight, kg
Top diameter, d, mm
Bottom diameter, D, mm
Flange diameter, A, mm
Hole center-to-center, B, mm
OGS-0.4-7
7m
177kg
150mm
275mm
495mm
420mm
OGS-1.3-7
7m
271.4kg
150mm
315mm
495mm
420mm
OGS-0.4-8
8m
197.5kg
150mm
275mm
495mm
420mm
OGS-0.4-9
9m
219.8kg
150mm
275mm
495mm
420mm
OGS-0.4-10
10m
241.6kg
150mm
275mm
495mm
420mm
OGS-0.7-8
8m
212.2kg
150mm
315mm
495mm
420mm
OGS-0.7-9
9m
235.8kg
150mm
315mm
495mm
420mm
OGS-0.7-10
10m
260kg
150mm
315mm
495mm
420mm
OGS-1.0-8
8m
260.9kg
150mm
315mm
495mm
420mm
OGS-1.0-9
9m
290.3kg
150mm
315mm
495mm
420mm
OGS-1.0-10
10m
319.7kg
150mm
315mm
495mm
420mm
OGS-1.3-8
8m
306.1kg
150mm
315mm
495mm
420mm
OGS-1.3-9
9m
341.2kg
150mm
315mm
495mm
420mm
OGS-1.3-10
10m
376.7kg
146mm
320mm
495mm
420mm
OGS-0.4-11
11m
262.9kg
150mm
275mm
495mm
420mm
OGS-0.4-12
12m
280.5kg
150mm
275mm
495mm
420mm
OGS-0.3-8
8m
132.5kg
90mm
200mm
395mm
310mm
OGS-0.4-9
9m
154.5kg
90mm
200mm
395mm
310mm
OGS-0.3-10
10m
169.7kg
90mm
210mm
395mm
310mm
OGS-0.4-10
10m
202.9kg
110mm
240mm
495mm
420mm
OGS-0.7-9
9m
192.4kg
90mm
280mm
495mm
420mm
OGS-0.7-10
10m
231.3kg
120mm
290mm
495mm
420mm
! The plant reserves the right to make design changes that do not affect the quality and technical characteristics of the product
!! The weight of the product shown in the table is calculated. Deviation of the actual weight from the calculated one is allowed