Conical octagonal poles (ОGК)

OrderGeneral information
Fill out the feedback form and our managers will contact you

    • * - required field

    Lighting of traffic avenues, traffic junctions, bridges, squares, yards, parks, squares, parking areas, etc.
    Poles are manufactured of steel sheets by bending with one longitudinal weld, they are protected from corrosion by hot galvanizing.

    This type of coating is not decorative, but only functional.  

    Corrosion resistance warranty is at least 25 years.  
    All the fasteners are galvanized.

    Under a special order it is possible to manufacture any standard sizes to be used in wind region I-VII. For each project support design is individually calculated.  Complete nomenclature of serial products and complete technical data are provided in the Technical Catalog.

    Technical information

    ModelHeight, H, mWeight, kgTop diameter, D, mmBottom diameter, D, mmFlange diameter, A, mmHole center-to-center, B, mm
    OGK-33m26 kg60mm132mm245mm160mm
    OGK-44m33 kg60mm136mm245mm160mm
    OGK-55m41 kg60mm136mm245mm160mm
    OGK-66m36 kg58mm100mm145mm110mm
    OGK-77m58 kg58mm135mm245mm160mm
    OGK-77m67 kg68mm150mm295mm200mm
    OGK-88m65 kg58mm135mm245mm160mm
    OGK-88m88 kg68mm166mm395mm300mm
    OGK-99m73 kg58mm135mm245mm160mm
    OGK-1010m103 kg58mm135mm245mm160mm
    OGK-1010m146 kg75mm190mm395mm300mm
    OGK-1010m172 kg100mm210mm395mm300mm
    OGK-1111m211 kg90mm190mm395mm300mm
    OGK-1212m176 kg72mm200mm395mm300mm
    OGK-1616m365 kg90mm300mm480mm380mm

    ! The plant reserves the right to make design changes that do not affect the quality and technical characteristics of the product

    !! The weight of the product shown in the table is calculated. Deviation of the actual weight from the calculated one is allowed