Octagonal conic bent pole (OGKLI)
Fill out the feedback form and our managers will contact you
Application:
Lighting of streets, avenues, main roads, bridges, squares, yards, parks, squares, parking areas, etc.
Poles are manufactured of sheet steel by the bending method with one longitudinal weld seam, protected from corrosion by the hot galvanizing method. This type of coating is not decorative and is of extremely functional nature. The guarantee for corrosion resistance makes at least 25 years.
All fittings are galvanized. Coating: hot galvanizing.
Advantages:
- Small weight
- Esthetic appearance
- High anticorrosion resistance of coating
- Long service life
- Convenience in installation and maintenance
Any standards sizes can be made according to the individual order for use in 1-7 wind area. The pole structured shall be designed individually for each facility.
Specifications
Model | Height, H, m | Weight, kg | Console length, L, m | Flange diameter, A, mm | Hole center-to-center, B, mm |
---|---|---|---|---|---|
OGKLI-8 | 8m | 113.4 kg | 1.25m | 395mm | 300mm |
OGKLI-11.5 | 11.5m | 178 kg | 1.8m | 395mm | 300mm |
OKKLI-6 | 6m | 61 kg | 0.8m | 295mm | 200mm |
OKKLI-8 | 8m | 87 kg | 1m | 370mm | 270mm |
OKKLI-9 | 9m | 134 kg | 1m | 450mm | 320mm |
! The plant reserves the right to make design changes that do not affect the quality and technical characteristics of the product
!! The weight of the product shown in the table is calculated. Deviation of the actual weight from the calculated one is allowed